Tredgrip Fudge Water Based Non Slip Coating 4 Litres



or make 4 interest-free payments of $42.49 AUD fortnightly with Afterpay More info


Tredgrip Fudge Water Based Non Slip Coating 4 Litres


Tredgrip is a water based non slip coating that is ideal for domestic and light commercial applications. Once fully cured, Tredgrip non slip coatings have a tough, rubberised, textured finish. It can be applied to a variety of surfaces including timber, fibreglass, concrete, and steel. Low sheen, non abrasive, tough and durable, Tredgrip has excellent weathering properties making it ideal for outdoor application. Tredgrip is available in a variety of different colours (see colour swatch on right). Tredgrip surpasses the Australian standards for non slip coatings, and has been certified accordingly. Whenever a surface requires positive traction, Tredgrip non slip paint can be used.

Touch Dry in 30 Minutes

Re-Coat 2-4 Hours

Suitable for Rolling 

Water clean Up 

Tredgrip is also membrane coating, and has excellent flexibility. Minor substrate movement including hair line cracks are easily covered with Tredgrip, and because it is permanently flexible, it will allow substrate expansion and contraction without any damage to the coating.

Tredgrip will NOT adhere to ceramic, glazed or treated tiles, and should not be used for heavy duty applications. It is a light to medium duty application mainly used for foot traffic, and will not stand up to heavy traffic (e.g- cars, and heavy machines), due to its flexibility.



Areas where Tredgrip can be used include: tennis courts, public access ramps and steps, decks, patios, pool surrounds, boats, sporting facilities and disabled care facilities. In fact, Tredgrip non slip coatings can be used almost anywhere a non slip decorative surface is required.



Tredgrip primers for different substrates:

  • Concrete – Tredprime
  • CFC sheeting – Enviroset 2100
  • Aluminium- Envirothane 8054
  • Timber- Envirothane 8054
  • Steel- Envirophos 2300
  • Fibreglass- N/A (no primer required)
  • Previously coated surfaces – acrylics, epoxies and polyurethanes. (no primer required, however the substrate requires a light sand/ abrasion).

TIP: If you are unsure that your substrate is compatible with Tredgrip or not, applying a SAMPLE TEST PATCH is always recommended.

    Our brands