Variety Paints 'N' More has a state-of-the-art tinting system enabling us to accurately tint any AS2700 Australian Standards Colour , we use Valspar Quality Tinters for our Custom Mixing we can compress into an Aerosol can or make into a 250ml ,500ml ,1 litre , 2 Litre,4 Litre or 20 Litre Can.
The Australian Standard AS2700 “Colour Standards for General Purposes” presents reference colours for use in choosing colour schemes in the industrial, architectural and decorative areas with particular emphasis on paints and related materials.
AS2700 has been in use in Australia since 1985, and is extensively referred to in many other Australian Standards .
Australian Standards colours are used through out many Industries in Australia and New Zealand.
Australian Standards Colours are used for the marking of physical hazards and the identification of certain equipment in man Industries.
Disclaimer: All colours are representative ONLY there is NO GUARANTEE that the colour swatches below will match the actual colour in reality. This variation in colour is due to computer generation of colour values and your screen settings. Please seek actual samples of your required colour for 100% product satisfaction.
Product Description: Product Information
Use AU500 Activator 1 litre
10-20% REDUCER RS605
IMU.TB543 PU Topcoat DTM Low Gloss - 70% Binder - 30% Color Toner optional 60% Binder - 40% Color Toner (on low opacity colours), is a two component, Polyurethane Topcoat DTM (direct to metal) with a low gloss finish - 60° gloss reading 0-20GU appearance. This Binder contains anti-corrosion chemicals offering excellent corrosion protection. IMU.TB543 is specially developed for Industrial OEM and aftermarket repair industry. Application enables fast operation - reducing costs. Air-dry and force dry capabilities. All Color Toners are chromate and lead free providing excellent UV protection.
Substrates:
Iron, steel, stainless steel (blasted), cast iron, galvanized steel, aluminum.
Primers: IME.FP400/401Epoxy Primer, IME.FP500/IME.PB500 PU Primer DTM
Other: Solvent resistant surfaces, cleaned/sanded/hardened original and cured coatings.
Preparation:
Dry Sanding VIM Primers: P180 – P240 – P320.
Dry sanding: P80 – P180
Galvanized: Sweep blasting recommended.
*Product can be brushed and rolled.
Cleaning:
Surface must be dry and free from any contamination, e.g. oil, grease, release agents. Use IME.AD690 Solvent Degreaser or Valspar Wax and Grease Remover.
Recoating:
Can be recoated with IME.CC700 Clear Coat Anti Graffiti (see TDS)
4:1 WITH AU540 ACTIVATOR
IMU.TB543 LOW GLOSS DTM 4 PARTS
IMU.AU540 PU Activator IME.RS603 1 PART
Universal Reducer Fast or 10%-30%
IME.RS605 Universal Reducer Medium or IME.RS607 Universal Reducer Slow or IME.RS609 Universal Reducer Ultra Slow
