Haymes Ultimate 2 Pack Epoxy Satin Ultra Deep Base 20 Litre Kit PART A & B

Haymes Ultimate 2 Pack Epoxy Satin Ultra Deep Base 20 Litre KIT 

Coverage will be about 120-150 Square Metres for 1 Coat 

                                        60-70 Square metres for 2 Coats 

Comes with

1 x U2ESUDT10 10 Litre Base (TO Be tinted to your required Colour) 

1x U2ESH10 10 Litre Hardener 

Notes 10 Litre Base Comes in a 20 Litre Container so you can add the 10 Litre Hardener to the Tub , Powerstir and then apply .

• Ultimate Epoxy Coatings

  A ground breaking, water based epoxy coating system that is low in odour, safe and easy to use.  Although designed to be used primarily on concrete floors this multi-functional coating system will protect and enhance tilt slabs, steel, slate and many other substrates. 

   

  Available in satin and gloss these epoxy systems are superior food grade coating solutions ideally suited for the health care industry, shopping centres and food processing areas as well as factory floors, garages and other heavy duty/high traffic production areas.  Available in a large range of colours as well as clear, Ultimate Epoxy Coatings clearly puts Haymes Paint at the pinnacle of water based protective coating technology.

    TECH SHEET 

  • Low environmental impact
  • Water based
  • Safe and easy to use
  • Self-priming
  • Excellent chemical resistance
  • Low odour
  • Low VOC
  • Available in satin or gloss
  • Available in a large range of colours
  • Fantastic cleaning properties
  • Suitable for a multitude of substrates – concrete, masonry, slate and some steel surfaces
  • NOTES - Need to use 1 x U2ESH10 10 Litre Hardener with this Product as it is a 1/1 Mix 
  • Haymes Ultimate Epoxy Satin is a two-pack water-based epoxy coating with excellent film properties and surface hardness. Ultimate Epoxy Satin is a self-priming and environmentally aware coating system which is ideal as a floor coating due to its excellent adhesion, chemical resistance, and tolerance to damp surfaces.
  • Although designed to be used primarily on concrete floors this multi-functional coating system will protect and enhance tilt slabs, steel, slate, and many other substrates.
  • Key features
  •  Self-priming
  •  Low odour / VOC
  •  Superior food grade coating
  •  Excellent chemical resistance
  •  Easy to clean
  • Vehicle Type Epoxy Hardener Polyamide Mixing ratio 1:1 (Pack A: Pack B) by volume.
  • POWER STIR Pot life Approximately 1 hour @ 25ºC Finish  Clean Up Water Coverage Up to 6 - 10m2/L
  • Dry Times Touch Dry: 3-5 hours Recoat: 4-6 hours
  • Film Build Wet: 100 - 170um Dry: 40 - 60um
  • Application tools Airless Spray (15 – 21 thou tip) at 1700-2100 psi,
  • Synthetic brush,
  • or Epoxy roller sleeve.
  • Concrete floors, walls, masonry, slate, and steel in areas such as:
  •  Flooring and seamless flooring
  •  Factories and warehouses.
  •  Hospitals and shopping centres
  •  Waterproofing concrete slabs before floor overlay
  •  Primed steel as a build or barrier coat
  •  Food&beverage industry and Cool rooms
  •  Schools and laboratories
  •  Retaining walls