SprayMax Plastic Adhesion Promoter 300 Gram

Ideal adhesion promoter for subsequent coatings on most plastics (comply with technical leaflet).

Advantages:

• A light, thin and uniform spray suffices
• Excellent adhesion characteristics
• Very fast drying
• Can be painted over after only 10 minutes
• Greatest elasticity and yield
• Laced with colourless, silver pigments

Colour:
Transparent

Size:
400 Gram 

• Priming and adhesion promoter for all common car and truck plastic parts, exterior

• Substrates:

  • PP, PP/EPDM, ABS, SAN, PC, PA, PUR-RIM, RTPU, PPO, PBT, PUR soft foam, UP-GF plastics

  Pretreatment:

  • Thoroughly clean surface and if necessary sand lightly when dry
  • Damage must be free of fat and dust and be dry
  • Clean substrate with SprayMax SprayMax Silicone Remover
  • The substrate must be free of external lubricants;
  • Annealing is recommended.
  • Shake the can well for 2 min. Make a trial spray.

  Spray application:

  • 1 light spray, approx. 1-2μm

  Drying times:

  • Air drying 10min / 20°C
  • Can be painted over  after 10min / 20°C

  Recoatable:

  • Recoatable with all commercial quality fillers and topcoats

  Yield:

  • approx. 0.5m² - 1m² / spray can depending on the application thickness and substrate

  Notes:

  • To be used by specialists only
  • Wear personal protection gear (respirator type: A2/P2 safety gloves, e.g. Latex or nitrile)
  • After finishing the painting process, turn the can over and spray the valve empty.
  • Dispose of the completely empty spray cans as recyclable material