Amaxi Monster Bundle 20 Piece Professional Kit NEW PRODUCT**

• Enhance any project you're working on. Monster Blocks are the ideal solution for Classic Car Custom Restoration, Boats, Planes, Trucks and anything project you're working on. A favorite among the professionals when blocking large surfaces.

The Most Important part of surface preparation is the sanding , It is at this stage of your refinish that will determine how your paintwork will end up, cannot stress this enough! so rub it right.

MADE IN AUSTRALIA 

• The Monster Bundle is 20 pieces of Amaxi's finest professional sanding blocks!

   

• The Monster BUNDLE COMES WITH THE FOLLOWING BLOCKS 

1 x Monster Block 350mm (Recommended Surface Area 350mm to 550mm)

1 x Monster Block 500mm (Recommended Surface Area 500mm to 900m)

1 x Monster Block 650mm (Recommended Surface Area 650mm to 1200mm)

MOBNSTER BLOCKS Used for long surface , flat and slight curve

1 x Multi Block Small 110mm

1 x Multi Block Standard 140mm

1 x Multi Block Long 280mm

MULTIBLOCKS Used for may surfaces flat & Curved,Hard & Soft but mainly used for shaping concave & Convex contours

1 x Eva Squeegee 110mm x 55mm x 10mm

THE EVA SQUEEGEE  Used for wiping off mud and slurry caused by wet sanding , if you have a lot of sanding to do then you are best to keep one in your back pocket so you can keep track on where you are up to.

1 x The Radblock 140mm 32°

1 x The Radblock 280mm 32°

THE RADBLOCK Used for the inner round curves where a flat block cannot go , Great for headlight surrounds , embossed bonnets and boot lids. WITH HOOK

1 x The Big One Block 500mm

THE BIG ONE Used for panels with a flat & Slight Curve .

1 x The Standard One 400mm

THE STANDARD ONE Used for panels with a flat & Slight Curve .

1 x The Small One 300mm

THE SMALL ONE Used for panels with a flat & Slight Curve .

1 x The Tearblock 140mm

1 x The Tearblock 280mm 

THE TEARBLOCK Used for those panels that go from a flat to an inner curve , Great for old school classic cars from the 50's , 60's & 70's BIG ONE Used for panels with a flat & Slight Curve .

1 x The Flexi One Block 2.0

THE FLEXI ONE A slim hard block with the ability to flex more than a standard sanding block , great for curves.

1 x The Velblock (Velcro Backed Block) 110mm

1 x The Velblock (Velcro Backed Block) 140mm

1 x The Velblock (Velcro Backed Block) 280mm

THE VELBLOCKS These Hook blocks make sanding a little easier . You dont have to hold the sanding paper in place while your'e Sanding so you can concentrate more on your technique, Great for Beginners and Pro's alike .

1 x The Chroma Block 

THE Chomablock 2.0 A slim soft block specially made for the extreme curve & Wet Sanding topcoats , every sanding kit must have one !

1 x The Customblock Mini 50mm to 100mm 

THE Customblock MINI is a small sized block for small size sanding , used for de-nibbing spots of contaminates in your paintwork (Recommended surface area 50mm-100mm