Troton Rangers 2K Polyurethane Bed Liner Protective Coating 058 Vanilla WHITE TOYOTA Kit - 4 Bottle Kit

Polyurethane protective coating with structure effect.

WE Can Tint this to Any Colour FOR FREE , Let us know either the Car Colour Code you want it in or an Australian Standard , RAL Colour , Pantone Colour or any Colour from our Massive Colour selections in store .

When you order it online add your colour choice in the notes once you go to the cart .

A FREE TROTON Adjustable Gun Will be given with your first KIT Only .

Description

2-component polyurethane protective Coating with a structured effect.

Advantages

• The product has excellent chemical (oil, gasoline, water, salt) and mechanical resistance (scratches, stains).
• Resistant to weather conditions (UV filters) and corrosion (anti-corrosive agents).
• Can be applied on a various of substrates.
• It can be applied with the UBS antigravel gun as well as with a conventional gravity spray gun.

Substrates

• Steel, galvanized steel, stainless steel, aluminum – apply after pre-sanding the surface with sandpaper of grade P180 to P320 or cleaning the surface with abrasive blasting to a cleanliness level of Sa 2 ½ according to PN-ISO 12944-4. To increase anti-corrosion protection and adhesion, it is recommended to apply Rangers over Troton epoxy or reactive primers (wash primer).
• Polyester laminates – sand using abrasive paper P180 or by using Troton’s unwoven abrasive fabric, clean and degrease (Silicone Remover Troton).
• Polyester body fillers – sand using abrasive paper with gradation from P120 to P240, clean and degrease (Silicone Remover Troton).
• Plastic surfaces – degrease (Silicone Remover Troton), sand with abrasive paper P240 or with Troton’s unwoven abrasive fabric, degrease again (Silicone Remover Troton), prime with an adhesive promoter, such as Plastic Primer Troton. Due to the many different types of plastic, adhesion testing is advised. Do not apply the product directly on bare metal. Rangers should be applied on primed surfaces or on 2K topcoats and basecoats after proper preparation (be careful with the application on old coatings, thinner testing is advised). Always abrade, clean and degrease the surface before application.

Do not apply the product on 1K primers. Instead, always prime the surfaces for the Rangers application with a 2k acrylic primer, 2K epoxy primer or 2k etching primer. Always wait the proper drying and hardening time of etching primer before application.

Do not apply Rangers directly on bare original paint or directly on coatings of car body parts from the aftermarket.