PMS123 PANTONE® Yellow Valspar Industrial GLOSS Enamel 2 Litres

Variety Paints 'N' More

$175.00 

or make 4 interest-free payments of $43.75 AUD fortnightly with Afterpay More info

Share:

    Variety Paints 'N' More Stocks Valspar Automotive Paint.

Valspar Industrial Enamel 2 Lt PMS 123 Yellow Paint Mix Pantone Colour 

Variety Paints 'N' More has a state-of-the-art tinting system enabling us to accurately tint any Pantone Matching System Colour (PMS)  , we use Valspar Quality Tinters for our Custom Mixing we can compress into an Aerosol can or make into a 250ml  ,500ml ,1 litre , 2 Litre,4 Litre or 20 Litre Can. 

Pantone Matching System (PMS) is a proprietary Colour space used in a variety of Industries , primarily the printing industry though sometimes in the manufacture of coloured paint , fabrics and plastics.The company is best known for its Pantone Matching System (PMS), a proprietary color space used in a variety of industries, primarily printing, though sometimes in the manufacture of colored paint, fabric, and plastics.

Disclaimer: All colours are representative ONLY there is NO GUARANTEE that the colour swatches below will match the actual colour in reality. This variation in colour is due to computer generation of colour values and your screen settings. Please seek actual samples of your required colour for 100% product satisfaction.
 


IME.TB300 is a Synthetic Topcoat High Gloss 80% Binder - 20% Color Toner optional 70% Binder - 30% Color Toner (on low opacity colours), with excellent appearance. For Machinery, Industrial OEM and aftermarket repairs with air and force dry capabilities. All Toners are chromate and lead free.

Substrates: Iron, steel, cast iron, galvanized steel, aluminum and galvanized. Primer surfaces - IME.FP300, IME.PB300 (Corrosion Protection) Other - solvent resistant surfaces, sanded, cleaned original and old cured coatings.

Preparation: PB300/TB300 Synthetic primer dry sanding: P320 – P400 PB300/TB300 Synthetic primer wet sanding: P400 – P800 Dry Sanding on substrate: P180 – P240 Galvanized: Sweep Blasting recommended. (More Detailed information go-to Preparation and Pre-treatment on Icris/CRS or website www.valsparindustrialmix.com)

Material Description Application Method Minimum DFT µm Maximum DFT µm Minimum WFT µm Maximum WFT µm IME.TB300 Spray 40µm 50µm 55µm 70µm *Product can be brushed or rolled.

Cleaning: Metal substrate and Primer surface must be dry and free from any contamination, eg, oil, grease, release agents. Use IME.AD690 Solvent Degreaser or Valspar Wax and Grease Remover. (More Detailed information go-to cleaning processes on Irics/CRS or website www.valsparindustrialmix.com)

Recoating: Can be recoated with IME.CC700 Clear Coat Anti Graffiti (see TDS)

Cleaning:IME.AD690 Solvent Degreaser Valspar Wax and Grease Remover Surface must be dry and free from any contamination, e.g. oil, grease

Note: IME.RS300 Reducer or IME.AS300 Synthetic Activator can be used. If you use IME.AS300 Synthetic Activator you improve the curing and the chemical resistance.

Preparation: Substrate Dry sanding: P180 – P240 Dry sanding: PB300/TB300 primers: P320 – P400 Wet sanding: PB300/TB300 primers: P400 – P800 Extra Corrosion protections use a recommend primer on blasted substrates.

Handling:Color preparation: Color preparation: 1. Stir binder until homogeneous 2. Add Color Toners 3. Mix mechanically (paint shaker/ mechanical stirrer) Before use/spraying: 1. Mix mechanically (paint shaker/ mechanical stirrer) 2. Add Activator and Reducer 3. Stir this mixture well with a mixing stick or a (mechanical) stirrer

Mixing ratio with Color Toner CRS Formula: (By volume)

IME.TB300 Synthetic Binder High Gloss IMU.CT range of VIM Color Toners (For mixing formula’s see VIM CRS) Synthetic Dryer is included in CRS Formula

IME.TB300 Synthetic Binder High Gloss IMU.CT range of VIM Color Toners (For mixing formula’s see VIM CRS) Synthetic Dryer is included in CRS Formula

For custom formulas (ONLY) add IME.AA300 Synthetic Dryer 3%

 

Mixing ratio with Reducer: (By volume)

IME.TB300 Synthetic Topcoat High Gloss 100%

IME.RS300 Synthetic Reducer 15-30%

 

Higher chemical resistant: Use Activator.

IME.TB300 Synthetic Topcoat High Gloss 100 Parts

IME.AS300 Synthetic Activator Max 25%

IME.RS300 Synthetic Reducer +0-10%

  

    Our brands