SprayMax Plastic Adhesion Promoter 300 Gram
Ideal adhesion promoter for subsequent coatings on most plastics (comply with technical leaflet).
Advantages:
- A light, thin and uniform spray suffices
- Excellent adhesion characteristics
- Very fast drying
- Can be painted over after only 10 minutes
- Greatest elasticity and yield
- Laced with colourless, silver pigments
Colour:
Transparent
Size:
400 Gram
- Priming and adhesion promoter for all common car and truck plastic parts, exterior
-
Substrates:
- PP, PP/EPDM, ABS, SAN, PC, PA, PUR-RIM, RTPU, PPO, PBT, PUR soft foam, UP-GF plastics
Pretreatment:
- Thoroughly clean surface and if necessary sand lightly when dry
- Damage must be free of fat and dust and be dry
- Clean substrate with SprayMax SprayMax Silicone Remover
- The substrate must be free of external lubricants;
- Annealing is recommended.
- Shake the can well for 2 min. Make a trial spray.
Spray application:
- 1 light spray, approx. 1-2μm
Drying times:
- Air drying 10min / 20°C
- Can be painted over after 10min / 20°C
Recoatable:
- Recoatable with all commercial quality fillers and topcoats
Yield:
- approx. 0.5m² - 1m² / spray can depending on the application thickness and substrate
Notes:
- To be used by specialists only
- Wear personal protection gear (respirator type: A2/P2 safety gloves, e.g. Latex or nitrile)
- After finishing the painting process, turn the can over and spray the valve empty.
- Dispose of the completely empty spray cans as recyclable material
You may also like...
Our brands
