Valspar Industrial Enamel AD300 Matting Agent 500ML

Variety Paints 'N' More


or make 4 interest-free payments of $13.75 AUD fortnightly with Afterpay More info


 Valspar VIM Synthetic Matting Agent Industrial Enamel AD300 Matting Agent 1 Litre

AD300 Synthetic Matting Agent is specially developed for the reduction of gloss in combination with TB300 Synthetic Topcoat High Gloss. Max.30% AD300 Synthetic Matting Agent can be added to TB300 80% Binder + 20% Color Toner optional 70% Binder - 30% Color Toner (on low opacity colors).

By adjusting the added % of Synthetic Matting Agent the gloss level of TB300 Synthetic Topcoat High Gloss can be reduced from High Gloss to Semi Gloss or Matt.

For Machinery, Industrial OEM and aftermarket repairs, easy to apply.

All Color Toners are chromate and lead free. Air drying is recommended, force-drying will result in a higher gloss finish.

Selection of hardener, reducer & color, can affect viscosity, flash-off time and thickness, this will also have an influence on the end gloss result too. Preparation: F

or more detailed information go-to Technical Information (TI), Substrate and Pre-treatment on Colour Retrieval System (CRS) or website

Substrates: Indoor: Iron, steel, cast iron, galvanized steel, aluminum and glass fiber reinforced plastics.

Outdoor: For metal substrates use FP300/PB300 Synthetic Primer or FP400/401 Epoxy Primer Other: Solvent resistant surfaces, cleaned/sanded/hardened original and cured Coatings. Iron/steel:

Abrasive shot blasting is recommended or dry sanding P80 – P180 Aluminum: P180 – P240 Galvanized: Sweep blasting recommended Paint finishes: P280 – P360 (Please, regularly check and change abrasive paper as required) Cleaning:

Surface must be dry and free from any contamination, e.g. oil, grease, release agents. Use AD690 Solvent Degreaser for metal substrate and paint finishes.

Our brands