SEM Color Horizons Wild Chartreuse Yellow Fluorescent 4 Litre RTU

Automotive Colour & Equipment

$599.00 

or make 4 interest-free payments of $149.75 AUD fortnightly with Afterpay More info

Share:
SEM™ Fluorescent colours will make any project stand out from the crowd.

NOTE This Product is Ready To use , Thinned ready for use 

Custom Finish Fluorescent Concentrates are a line of intense, eye-catching colors for creating custom graphics. 

Features Applications Properties

  • Extra bright colors
  • High visual impact
  • Compatible with multiple paint technologies
  • Base Colors Bright White
  • Paste Pearls
  • Lightning FX 
  • Flakes
  • Pint container
  • Coats: 4-5 medium wet
  • Flash time: 10-15 min between coats

 

HANDLING AND APPLICATION PREPARATION: Over Base Colors, Paste Pearls, Lightning FX or Flakes:

Note: Fluorescent Concentrates have a short lifetime because of the limited "light-fastness" in the sun and are not recommended for overall refinishing or when long life of the color application is required.

All Fluorescent Concentrates should be applied over Base Colors Bright White for maximum brightness. Additionally, Base Colors Bright White can be tinted with Fluorescent Concentrates, usually 10% before reducing.

This will give the base a pastel tint of the fluorescent that will be applied afterwards, helping with the coverage of Fluorescent Concentrates. Base Colors, Paste Pearls, Lightning FX or Flakes should be allowed sufficient dry time, typically 30 minutes after last coat.  

Before applying Fluorescent Concentrates. MIXING: Shake or stir thoroughly. All Fluorescent Concentrates should be mixed with Mix Clear. FIRST, MIX BY VOLUME: 4 Parts 1 Part Mix Clear Fluorescent Concentrates THEN, MIX BY VOLUME: 1 Part 1 Part Fluorescent / Mix Clear SR/SRX Reducer

Note: Use of additives other than SR or SRX reducers are not recommended and may affect both the appearance and performance of Fluorescent Concentrates. 

Always use the reducer best suited to shop conditions. Dry times may vary depending on film build, shop conditions and reducer used.

One capful of most urethane clearcoat hardeners can be added to the Mix Clear / Fluorescent Concentrates mixture. This addition yields excellent early adhesion, superior chip resistance and is especially useful in multi-layered designs which result in excessive film build.

Pot life is one hour when making this addition. Test compatibility before spraying and always use hardeners that meet VOC regulations for your area.

Our brands