Motospray Red Oxide Structural Primer 500ml

Hichem

$19.95 

or make 4 interest-free payments of $4.99 AUD fortnightly with Afterpay More info

Share:
Motospray Steel Red Primer is A premium quality zinc phosphate short oil alkyd based primer. Cost efficient, fast drying, anti corrosive coating. Uses For use on general industrial, engineering products, structural projects and farming environments.
Properties  Fast drying  Excellent anti corrosive properties based on zinc phosphate.  Good adhesion  Excellent weathering after top coating  May be used as sole coating for interior use  Good short term exterior protection (up to 6 months) without top coating.
Surface preparation Abrasive blast clean to AS1627.4 Class 2 minimum. OR: Remove all scale, rust, old and flaking paint etc using a wire brush or mechanical means. All surfaces must be thoroughly degreased with HiChem Prepwash. All surfaces must be dried and primed as soon as possible after cleaning. When applying to non-ferrous surfaces such as galvanised iron, zinc/alum or aluminium apply a thin coat of HiChem Super Etch Primer. Application By spray only - conventional or airless. Apply 2-3 medium coats to produce the required build. Minimum dry film build 25 micron is recommended. Thinning Conventional spray gun: May be thinned up to 50% with HiChem Enamel Thinner E250. In hot conditions (say greater than 30C) use HiChem Mineral Turps. Airless spray equipment: Thin up to 15% with HiChem Enamel Thinner E250. In hot conditions (say greater than 30C) use HiChem Mineral Turps.
Drying time Surface dry: 10-15 mins depending on temperature and build Touch dry: 40-50 mins depending on temperature and build Re-coat after 1 hour with conventional enamels such as HiChem Quick Drying Spray Enamel. Coverage Approximately 21 square metres per litre theoretical when applied at dry film thickness of 25 micron (wet film approx. 50 microns).

Our brands