{"title":"KBS Black Top","description":"KBS Black Top","products":[{"product_id":"kbs-blacktop-1-litre-gloss-black","title":"KBS BlackTop 1 Litre Gloss Black 8401","description":"\u003cp\u003eProduct Description\u003cbr\u003e\u003cbr\u003eWheels Painted with BlackTopBlackTop is a high performance protective coating specifically formulated to withstand dulling and fading caused by prolonged sunlight exposure. BlackTop may be used alone as a resilient coating, however to achieve ulimate rust protection we recommend BlackTop to be used in combination with KBS RustSeal.\u003cbr\u003e\u003cbr\u003eFirst apply RustSeal by following the easy KBS 3 Step Total Rust Eradication System to permanently seal the surface and then topcoat with BlackTop for an incredibly tough and professional looking finish.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0743\/3339\/files\/Black-Top-All-Sizes2_large.jpg?v=1486524740\" alt=\"\" width=\"196\" height=\"196\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"http:\/\/kbs-coatings.com.au\/wp-content\/uploads\/2014\/02\/Black-Top-All-Sizes2-219x219.jpg\" alt=\"Black Top Product Image\"\u003e\u003cbr\u003e\u003cbr\u003eMore Information:  \u003cbr\u003e\u003cbr\u003eFeatures:\u003cbr\u003e\u003cbr\u003eSingle component formula\u003cbr\u003ePermanent UV stability\u003cbr\u003eNo chalking or fading\u003cbr\u003eRock hard permanent topcoat\u003cbr\u003eFlexible coating which expands \u0026amp; contracts\u003cbr\u003eHigh temp resistance\u003cbr\u003eNon-porous coating\u003cbr\u003eSuperior flow and levelling\u003cbr\u003eApply by brush or sprayer\u003c\/p\u003e\n\u003cp\u003eKBS BlackTop is a permanent high solids, single component moisture curing custom black top coat. BlackTop is the latest development in ultra high performance topcoats with very high solids (over 60%) and low VOCs.\u003cbr\u003e\u003cbr\u003eBlackTop once cured is incredibly tough and hard like no other black topcoat you have used before. This wet gloss\/satin black coating remains permanently flexible and is able to perform in the toughest environments including Australia’s highest UV applications without yellowing or cracking.\u003cbr\u003e\u003cbr\u003eBlackTop Topcoat can be applied by brush (without brush marks) roller and conventional spray gun easily and unlike normal 2 Pak coatings no hardener is needed! BlackTop Topcoat can cure without heat or UV lights in temperatures from 60°C to 300°C.\u003cbr\u003e\u003cbr\u003eBlackTop Topcoat is a unique type of coating in Australia and unlike any other conventional topcoat, so please read the guidelines, directions and warnings thoroughly.\u003cbr\u003e\u003cbr\u003eIMPORTANT WARNINGS\u003cbr\u003e\u003cbr\u003eDo not paint out of the can\u003cbr\u003eKeep lid on at all times\u003cbr\u003eSeal can immediately after use\u003cbr\u003eKeep paint groove free of coating\u003cbr\u003eIf spraying you must follow all warnings and cautions on the can and in directions\u003cbr\u003eWheels Painted with BlackTop\u003c\/p\u003e\n\u003cp\u003eSURFACE PREPARATION\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0743\/3339\/files\/Black-Top-on-Chassis-195x219_1_large.jpg?v=1486524826\" alt=\"\" width=\"112\" height=\"126\"\u003e\u003cbr\u003e\u003cbr\u003eBlackTop should always be applied over existing primers and never directly over unprimed metal or other surfaces.\u003cbr\u003e\u003cbr\u003eFor coating over solid colour or fully cured coatings;\u003cbr\u003e\u003cbr\u003eClean the surface with conventional surface panel prep solution and \/ or KBS AquaKlean;\u003cbr\u003eDeglaze with 600-1200 sandpaper and clean again, allow to dry.\u003cbr\u003eThe use of Fusion SEP as an intermediary coating is advisable as it will allow for a more even finish but not mandatory.\u003cbr\u003eFor coating over freshly painted RustSeal;\u003cbr\u003e\u003cbr\u003eLess than 2 hours old – Apply BlackTop directly as no other prep is required.\u003cbr\u003eFor all other applications\u003cbr\u003e\u003cbr\u003eLightly sand with 320 grit paper then clean \u0026amp; dry surface before topcoating.\u003cbr\u003ePREPARING FOR APPLICATION\u003cbr\u003e\u003cbr\u003eBlack Top painted on Chassis ALWAYS USE PROTECTIVE GLOVES AND EYEWEAR WHEN USING BLACKTOP.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0743\/3339\/files\/Wheels-Painted-with-BlackTop_large.jpg?v=1486525099\" alt=\"\" width=\"209\" height=\"157\"\u003e\u003cbr\u003e\u003cbr\u003eIdeal application temperatures are 15-25°C.\u003cbr\u003eUse only in moderate to dry atmospheric conditions i.e 65% humidity and lower.\u003cbr\u003eDo not shake can. DO NOT PAINT OUT OF CAN!\u003cbr\u003eAfter a good stir, dispense a working amount of BlackTop into a separate container (steel or glass is best) and seal original can immediately.\u003cbr\u003eUnused paint should NEVER be put back into the can as it will shorten its shelf life and cause pressure build-up possibly popping the lid. Keep can groove free of paint by using a scoop or KBS Paint Spout.\u003cbr\u003eUse plastic wrap between the lid and the top of the can to stop metal to metal contact as Black-Top can permanently seal the lid. If there is any trouble resealing the can lid tightly, transfer and store BlackTop in a proportionally sized clean glass jar or new steel can.\u003cbr\u003eAlways store in a cool dry place.\u003cbr\u003e\u003cbr\u003eAPPLYING BLACKTOP TOPCOAT\u003cbr\u003e\u003cbr\u003eApply BlackTop to clean \u0026amp; dry prepared surfaces using a bristle brush, foam brush, roller, or spray equipment. BlackTop has superior self-levelling properties. Brush marks will flow out. When brushing apply thin covering coats. For large surface areas best results will be achieved with application by spray gun.\u003cbr\u003e\u003cbr\u003eIF SPRAYING, ALWAYS WEAR AN AIR SUPPLIED RESPIRATOR AND EYE PROTECTION: NIOSH\/MSHA approved organic vapor particulate respirator.\u003cbr\u003e\u003cbr\u003eNo.1 Thinner Product ImageThinning is not generally required if brushing, if needed thin 5 – 10%, for spraying 10%-15% is normally adequate but can be thinned up to 30%. Use KBS #1 Thinner ONLY.\u003cbr\u003eWhen spraying: Spray pressure of 35-45 psi, 250-330kpa for siphon\/pot guns and 25-35psi, 170-250kpa for gravity\/top container guns.\u003cbr\u003eAlways apply a MINIMUM of 2 covering coats.\u003cbr\u003eFirst coat thin covering followed by moderate to full coat (50μm each approximately) for general applications.\u003cbr\u003eFor marine or industrial applications, apply a MINIMUM of 3 thin covering coats (50μm each).\u003cbr\u003eRe-coating can be done once the first or consecutive coat is dry-to-touch and does not leave a fingerprint.\u003cbr\u003eRemember to clean your spray gun immediately after using BlackTop.\u003cbr\u003eFOR BEST END RESULTS, always apply coats consecutively within 6 hours of each coat curing.\u003cbr\u003eAverage cure times are 1-2 hours, depending on humidity levels.\u003cbr\u003e\u003cbr\u003eNOTE\u003cbr\u003e\u003cbr\u003eDo not apply BlackTop in wet or humid conditions to avoid rapid curing.\u003cbr\u003eDo not apply BlackTop too thick or too quick between coats.\u003cbr\u003eIn each of these instances, surface bubbling may result as released carbon dioxide becomes entrapped beneath the top surface layer of paint.\u003cbr\u003e\u003cbr\u003eCLEAN UP\u003cbr\u003e\u003cbr\u003eUse KBS #1 Thinner or gun clean for immediate clean up including your spray gun.\u003cbr\u003eIMPORTANT: Remember BlackTop must be cleaned up before it dries. It cannot be removed by any solvent once cured.\u003cbr\u003e\u003cbr\u003eAlways wear protective gloves (KBS Black Nitrile Disposable Gloves) to avoid skin contact and temporary staining. If skin contact accidentally occurs, immediately remove with #1 Thinner or lacquer thinner followed by soap and water. If BlackTop should stain your skin, only the course of time will remove it.\u003cbr\u003e\u003cbr\u003eGENERAL PAINTING TIPS AND GUIDES\u003cbr\u003e\u003cbr\u003eIf painting in conditions of high temperature and humidity thin BlackTop more than normal to avoid gassing.\u003cbr\u003eDo not use UV or bake lights to cure BlackTop.\u003cbr\u003eBlackTop will take 4 days to become hard under normal conditions and will continue to harden over the following weeks.\u003cbr\u003eIn spray booths use low air flow and moderate temperatures for curing.\u003cbr\u003eBlackTop can be cut and polished as a normal Topcoat after 24 hours under normal conditions.\u003c\/p\u003e","brand":"Autobody Supplies","offers":[{"title":"Default Title","offer_id":25010365768,"sku":"K8401","price":179.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/3339\/products\/BlackTop_KBS_Chassis_Coater_1_Litre_Gloss_Black.jpg?v=1509574048"},{"product_id":"kbs-blacktop-1-litre-satin-black","title":"KBS BlackTop 1 Litre Satin Black 8402","description":"\u003cp\u003eProduct Description\u003cbr\u003e\u003cbr\u003eWheels Painted with BlackTopBlackTop is a high performance protective coating specifically formulated to withstand dulling and fading caused by prolonged sunlight exposure. BlackTop may be used alone as a resilient coating, however to achieve ulimate rust protection we recommend BlackTop to be used in combination with KBS RustSeal.\u003cbr\u003e\u003cbr\u003eFirst apply RustSeal by following the easy KBS 3 Step Total Rust Eradication System to permanently seal the surface and then topcoat with BlackTop for an incredibly tough and professional looking finish.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0743\/3339\/files\/Black-Top-All-Sizes2_large.jpg?v=1486524740\" alt=\"\" width=\"196\" height=\"196\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"http:\/\/kbs-coatings.com.au\/wp-content\/uploads\/2014\/02\/Black-Top-All-Sizes2-219x219.jpg\" alt=\"Black Top Product Image\"\u003e\u003cbr\u003e\u003cbr\u003eMore Information:  \u003cbr\u003e\u003cbr\u003eFeatures:\u003cbr\u003e\u003cbr\u003eSingle component formula\u003cbr\u003ePermanent UV stability\u003cbr\u003eNo chalking or fading\u003cbr\u003eRock hard permanent topcoat\u003cbr\u003eFlexible coating which expands \u0026amp; contracts\u003cbr\u003eHigh temp resistance\u003cbr\u003eNon-porous coating\u003cbr\u003eSuperior flow and levelling\u003cbr\u003eApply by brush or sprayer\u003c\/p\u003e\n\u003cp\u003eKBS BlackTop is a permanent high solids, single component moisture curing custom black top coat. BlackTop is the latest development in ultra high performance topcoats with very high solids (over 60%) and low VOCs.\u003cbr\u003e\u003cbr\u003eBlackTop once cured is incredibly tough and hard like no other black topcoat you have used before. This wet gloss\/satin black coating remains permanently flexible and is able to perform in the toughest environments including Australia’s highest UV applications without yellowing or cracking.\u003cbr\u003e\u003cbr\u003eBlackTop Topcoat can be applied by brush (without brush marks) roller and conventional spray gun easily and unlike normal 2 Pak coatings no hardener is needed! BlackTop Topcoat can cure without heat or UV lights in temperatures from 60°C to 300°C.\u003cbr\u003e\u003cbr\u003eBlackTop Topcoat is a unique type of coating in Australia and unlike any other conventional topcoat, so please read the guidelines, directions and warnings thoroughly.\u003cbr\u003e\u003cbr\u003eIMPORTANT WARNINGS\u003cbr\u003e\u003cbr\u003eDo not paint out of the can\u003cbr\u003eKeep lid on at all times\u003cbr\u003eSeal can immediately after use\u003cbr\u003eKeep paint groove free of coating\u003cbr\u003eIf spraying you must follow all warnings and cautions on the can and in directions\u003cbr\u003eWheels Painted with BlackTop\u003c\/p\u003e\n\u003cp\u003eSURFACE PREPARATION\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0743\/3339\/files\/Black-Top-on-Chassis-195x219_1_large.jpg?v=1486524826\" alt=\"\" width=\"112\" height=\"126\"\u003e\u003cbr\u003e\u003cbr\u003eBlackTop should always be applied over existing primers and never directly over unprimed metal or other surfaces.\u003cbr\u003e\u003cbr\u003eFor coating over solid colour or fully cured coatings;\u003cbr\u003e\u003cbr\u003eClean the surface with conventional surface panel prep solution and \/ or KBS AquaKlean;\u003cbr\u003eDeglaze with 600-1200 sandpaper and clean again, allow to dry.\u003cbr\u003eThe use of Fusion SEP as an intermediary coating is advisable as it will allow for a more even finish but not mandatory.\u003cbr\u003eFor coating over freshly painted RustSeal;\u003cbr\u003e\u003cbr\u003eLess than 2 hours old – Apply BlackTop directly as no other prep is required.\u003cbr\u003eFor all other applications\u003cbr\u003e\u003cbr\u003eLightly sand with 320 grit paper then clean \u0026amp; dry surface before topcoating.\u003cbr\u003ePREPARING FOR APPLICATION\u003cbr\u003e\u003cbr\u003eBlack Top painted on Chassis ALWAYS USE PROTECTIVE GLOVES AND EYEWEAR WHEN USING BLACKTOP.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0743\/3339\/files\/Wheels-Painted-with-BlackTop_large.jpg?v=1486525099\" alt=\"\" width=\"209\" height=\"157\"\u003e\u003cbr\u003e\u003cbr\u003eIdeal application temperatures are 15-25°C.\u003cbr\u003eUse only in moderate to dry atmospheric conditions i.e 65% humidity and lower.\u003cbr\u003eDo not shake can. DO NOT PAINT OUT OF CAN!\u003cbr\u003eAfter a good stir, dispense a working amount of BlackTop into a separate container (steel or glass is best) and seal original can immediately.\u003cbr\u003eUnused paint should NEVER be put back into the can as it will shorten its shelf life and cause pressure build-up possibly popping the lid. Keep can groove free of paint by using a scoop or KBS Paint Spout.\u003cbr\u003eUse plastic wrap between the lid and the top of the can to stop metal to metal contact as Black-Top can permanently seal the lid. If there is any trouble resealing the can lid tightly, transfer and store BlackTop in a proportionally sized clean glass jar or new steel can.\u003cbr\u003eAlways store in a cool dry place.\u003cbr\u003e\u003cbr\u003eAPPLYING BLACKTOP TOPCOAT\u003cbr\u003e\u003cbr\u003eApply BlackTop to clean \u0026amp; dry prepared surfaces using a bristle brush, foam brush, roller, or spray equipment. BlackTop has superior self-levelling properties. Brush marks will flow out. When brushing apply thin covering coats. For large surface areas best results will be achieved with application by spray gun.\u003cbr\u003e\u003cbr\u003eIF SPRAYING, ALWAYS WEAR AN AIR SUPPLIED RESPIRATOR AND EYE PROTECTION: NIOSH\/MSHA approved organic vapor particulate respirator.\u003cbr\u003e\u003cbr\u003eNo.1 Thinner Product ImageThinning is not generally required if brushing, if needed thin 5 – 10%, for spraying 10%-15% is normally adequate but can be thinned up to 30%. Use KBS #1 Thinner ONLY.\u003cbr\u003eWhen spraying: Spray pressure of 35-45 psi, 250-330kpa for siphon\/pot guns and 25-35psi, 170-250kpa for gravity\/top container guns.\u003cbr\u003eAlways apply a MINIMUM of 2 covering coats.\u003cbr\u003eFirst coat thin covering followed by moderate to full coat (50μm each approximately) for general applications.\u003cbr\u003eFor marine or industrial applications, apply a MINIMUM of 3 thin covering coats (50μm each).\u003cbr\u003eRe-coating can be done once the first or consecutive coat is dry-to-touch and does not leave a fingerprint.\u003cbr\u003eRemember to clean your spray gun immediately after using BlackTop.\u003cbr\u003eFOR BEST END RESULTS, always apply coats consecutively within 6 hours of each coat curing.\u003cbr\u003eAverage cure times are 1-2 hours, depending on humidity levels.\u003cbr\u003e\u003cbr\u003eNOTE\u003cbr\u003e\u003cbr\u003eDo not apply BlackTop in wet or humid conditions to avoid rapid curing.\u003cbr\u003eDo not apply BlackTop too thick or too quick between coats.\u003cbr\u003eIn each of these instances, surface bubbling may result as released carbon dioxide becomes entrapped beneath the top surface layer of paint.\u003cbr\u003e\u003cbr\u003eCLEAN UP\u003cbr\u003e\u003cbr\u003eUse KBS #1 Thinner or gun clean for immediate clean up including your spray gun.\u003cbr\u003eIMPORTANT: Remember BlackTop must be cleaned up before it dries. It cannot be removed by any solvent once cured.\u003cbr\u003e\u003cbr\u003eAlways wear protective gloves (KBS Black Nitrile Disposable Gloves) to avoid skin contact and temporary staining. If skin contact accidentally occurs, immediately remove with #1 Thinner or lacquer thinner followed by soap and water. If BlackTop should stain your skin, only the course of time will remove it.\u003cbr\u003e\u003cbr\u003eGENERAL PAINTING TIPS AND GUIDES\u003cbr\u003e\u003cbr\u003eIf painting in conditions of high temperature and humidity thin BlackTop more than normal to avoid gassing.\u003cbr\u003eDo not use UV or bake lights to cure BlackTop.\u003cbr\u003eBlackTop will take 4 days to become hard under normal conditions and will continue to harden over the following weeks.\u003cbr\u003eIn spray booths use low air flow and moderate temperatures for curing.\u003cbr\u003eBlackTop can be cut and polished as a normal Topcoat after 24 hours under normal conditions.\u003c\/p\u003e","brand":"Autobody Supplies","offers":[{"title":"Default Title","offer_id":29445561873,"sku":"K8402","price":169.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/3339\/products\/BlackTop_KBS_Chassis_Coater_1_Litre_Satin_Black.jpg?v=1486525602"},{"product_id":"kbs-blacktop-4-litre-satin-black","title":"KBS BlackTop 4 Litre Satin Black 8502","description":"\u003cp\u003eProduct Description\u003cbr\u003e\u003cbr\u003eWheels Painted with BlackTopBlackTop is a high performance protective coating specifically formulated to withstand dulling and fading caused by prolonged sunlight exposure. BlackTop may be used alone as a resilient coating, however to achieve ulimate rust protection we recommend BlackTop to be used in combination with KBS RustSeal.\u003cbr\u003e\u003cbr\u003eFirst apply RustSeal by following the easy KBS 3 Step Total Rust Eradication System to permanently seal the surface and then topcoat with BlackTop for an incredibly tough and professional looking finish.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0743\/3339\/files\/Black-Top-All-Sizes2_large.jpg?v=1486524740\" alt=\"\" width=\"196\" height=\"196\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"http:\/\/kbs-coatings.com.au\/wp-content\/uploads\/2014\/02\/Black-Top-All-Sizes2-219x219.jpg\" alt=\"Black Top Product Image\"\u003e\u003cbr\u003e\u003cbr\u003eMore Information:  \u003cbr\u003e\u003cbr\u003eFeatures:\u003cbr\u003e\u003cbr\u003eSingle component formula\u003cbr\u003ePermanent UV stability\u003cbr\u003eNo chalking or fading\u003cbr\u003eRock hard permanent topcoat\u003cbr\u003eFlexible coating which expands \u0026amp; contracts\u003cbr\u003eHigh temp resistance\u003cbr\u003eNon-porous coating\u003cbr\u003eSuperior flow and levelling\u003cbr\u003eApply by brush or sprayer\u003c\/p\u003e\n\u003cp\u003eKBS BlackTop is a permanent high solids, single component moisture curing custom black top coat. BlackTop is the latest development in ultra high performance topcoats with very high solids (over 60%) and low VOCs.\u003cbr\u003e\u003cbr\u003eBlackTop once cured is incredibly tough and hard like no other black topcoat you have used before. This wet gloss\/satin black coating remains permanently flexible and is able to perform in the toughest environments including Australia’s highest UV applications without yellowing or cracking.\u003cbr\u003e\u003cbr\u003eBlackTop Topcoat can be applied by brush (without brush marks) roller and conventional spray gun easily and unlike normal 2 Pak coatings no hardener is needed! BlackTop Topcoat can cure without heat or UV lights in temperatures from 60°C to 300°C.\u003cbr\u003e\u003cbr\u003eBlackTop Topcoat is a unique type of coating in Australia and unlike any other conventional topcoat, so please read the guidelines, directions and warnings thoroughly.\u003cbr\u003e\u003cbr\u003eIMPORTANT WARNINGS\u003cbr\u003e\u003cbr\u003eDo not paint out of the can\u003cbr\u003eKeep lid on at all times\u003cbr\u003eSeal can immediately after use\u003cbr\u003eKeep paint groove free of coating\u003cbr\u003eIf spraying you must follow all warnings and cautions on the can and in directions\u003cbr\u003eWheels Painted with BlackTop\u003c\/p\u003e\n\u003cp\u003eSURFACE PREPARATION\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0743\/3339\/files\/Black-Top-on-Chassis-195x219_1_large.jpg?v=1486524826\" alt=\"\" width=\"112\" height=\"126\"\u003e\u003cbr\u003e\u003cbr\u003eBlackTop should always be applied over existing primers and never directly over unprimed metal or other surfaces.\u003cbr\u003e\u003cbr\u003eFor coating over solid colour or fully cured coatings;\u003cbr\u003e\u003cbr\u003eClean the surface with conventional surface panel prep solution and \/ or KBS AquaKlean;\u003cbr\u003eDeglaze with 600-1200 sandpaper and clean again, allow to dry.\u003cbr\u003eThe use of Fusion SEP as an intermediary coating is advisable as it will allow for a more even finish but not mandatory.\u003cbr\u003eFor coating over freshly painted RustSeal;\u003cbr\u003e\u003cbr\u003eLess than 2 hours old – Apply BlackTop directly as no other prep is required.\u003cbr\u003eFor all other applications\u003cbr\u003e\u003cbr\u003eLightly sand with 320 grit paper then clean \u0026amp; dry surface before topcoating.\u003cbr\u003ePREPARING FOR APPLICATION\u003cbr\u003e\u003cbr\u003eBlack Top painted on Chassis ALWAYS USE PROTECTIVE GLOVES AND EYEWEAR WHEN USING BLACKTOP.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0743\/3339\/files\/Wheels-Painted-with-BlackTop_large.jpg?v=1486525099\" alt=\"\" width=\"209\" height=\"157\"\u003e\u003cbr\u003e\u003cbr\u003eIdeal application temperatures are 15-25°C.\u003cbr\u003eUse only in moderate to dry atmospheric conditions i.e 65% humidity and lower.\u003cbr\u003eDo not shake can. DO NOT PAINT OUT OF CAN!\u003cbr\u003eAfter a good stir, dispense a working amount of BlackTop into a separate container (steel or glass is best) and seal original can immediately.\u003cbr\u003eUnused paint should NEVER be put back into the can as it will shorten its shelf life and cause pressure build-up possibly popping the lid. Keep can groove free of paint by using a scoop or KBS Paint Spout.\u003cbr\u003eUse plastic wrap between the lid and the top of the can to stop metal to metal contact as Black-Top can permanently seal the lid. If there is any trouble resealing the can lid tightly, transfer and store BlackTop in a proportionally sized clean glass jar or new steel can.\u003cbr\u003eAlways store in a cool dry place.\u003cbr\u003e\u003cbr\u003eAPPLYING BLACKTOP TOPCOAT\u003cbr\u003e\u003cbr\u003eApply BlackTop to clean \u0026amp; dry prepared surfaces using a bristle brush, foam brush, roller, or spray equipment. BlackTop has superior self-levelling properties. Brush marks will flow out. When brushing apply thin covering coats. For large surface areas best results will be achieved with application by spray gun.\u003cbr\u003e\u003cbr\u003eIF SPRAYING, ALWAYS WEAR AN AIR SUPPLIED RESPIRATOR AND EYE PROTECTION: NIOSH\/MSHA approved organic vapor particulate respirator.\u003cbr\u003e\u003cbr\u003eNo.1 Thinner Product ImageThinning is not generally required if brushing, if needed thin 5 – 10%, for spraying 10%-15% is normally adequate but can be thinned up to 30%. Use KBS #1 Thinner ONLY.\u003cbr\u003eWhen spraying: Spray pressure of 35-45 psi, 250-330kpa for siphon\/pot guns and 25-35psi, 170-250kpa for gravity\/top container guns.\u003cbr\u003eAlways apply a MINIMUM of 2 covering coats.\u003cbr\u003eFirst coat thin covering followed by moderate to full coat (50μm each approximately) for general applications.\u003cbr\u003eFor marine or industrial applications, apply a MINIMUM of 3 thin covering coats (50μm each).\u003cbr\u003eRe-coating can be done once the first or consecutive coat is dry-to-touch and does not leave a fingerprint.\u003cbr\u003eRemember to clean your spray gun immediately after using BlackTop.\u003cbr\u003eFOR BEST END RESULTS, always apply coats consecutively within 6 hours of each coat curing.\u003cbr\u003eAverage cure times are 1-2 hours, depending on humidity levels.\u003cbr\u003e\u003cbr\u003eNOTE\u003cbr\u003e\u003cbr\u003eDo not apply BlackTop in wet or humid conditions to avoid rapid curing.\u003cbr\u003eDo not apply BlackTop too thick or too quick between coats.\u003cbr\u003eIn each of these instances, surface bubbling may result as released carbon dioxide becomes entrapped beneath the top surface layer of paint.\u003cbr\u003e\u003cbr\u003eCLEAN UP\u003cbr\u003e\u003cbr\u003eUse KBS #1 Thinner or gun clean for immediate clean up including your spray gun.\u003cbr\u003eIMPORTANT: Remember BlackTop must be cleaned up before it dries. It cannot be removed by any solvent once cured.\u003cbr\u003e\u003cbr\u003eAlways wear protective gloves (KBS Black Nitrile Disposable Gloves) to avoid skin contact and temporary staining. If skin contact accidentally occurs, immediately remove with #1 Thinner or lacquer thinner followed by soap and water. If BlackTop should stain your skin, only the course of time will remove it.\u003cbr\u003e\u003cbr\u003eGENERAL PAINTING TIPS AND GUIDES\u003cbr\u003e\u003cbr\u003eIf painting in conditions of high temperature and humidity thin BlackTop more than normal to avoid gassing.\u003cbr\u003eDo not use UV or bake lights to cure BlackTop.\u003cbr\u003eBlackTop will take 4 days to become hard under normal conditions and will continue to harden over the following weeks.\u003cbr\u003eIn spray booths use low air flow and moderate temperatures for curing.\u003cbr\u003eBlackTop can be cut and polished as a normal Topcoat after 24 hours under normal conditions.\u003c\/p\u003e","brand":"Autobody Supplies","offers":[{"title":"Default Title","offer_id":6879129567267,"sku":"K8502","price":495.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/3339\/products\/BlackTop_KBS_Chassis_Coater_4_Litre_Satin_Black.jpg?v=1519770559"},{"product_id":"kbs-blacktop-20-litre-satin-black","title":"KBS BlackTop 20 Litre OEM Satin Black 8602","description":"\u003cp\u003eProduct Description\u003cbr\u003e\u003cbr\u003eWheels Painted with BlackTopBlackTop is a high performance protective coating specifically formulated to withstand dulling and fading caused by prolonged sunlight exposure. BlackTop may be used alone as a resilient coating, however to achieve ulimate rust protection we recommend BlackTop to be used in combination with KBS RustSeal.\u003cbr\u003e\u003cbr\u003eFirst apply RustSeal by following the easy KBS 3 Step Total Rust Eradication System to permanently seal the surface and then topcoat with BlackTop for an incredibly tough and professional looking finish.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0743\/3339\/files\/Black-Top-All-Sizes2_large.jpg?v=1486524740\" alt=\"\" width=\"196\" height=\"196\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"http:\/\/kbs-coatings.com.au\/wp-content\/uploads\/2014\/02\/Black-Top-All-Sizes2-219x219.jpg\" alt=\"Black Top Product Image\"\u003e\u003cbr\u003e\u003cbr\u003eMore Information:  \u003cbr\u003e\u003cbr\u003eFeatures:\u003cbr\u003e\u003cbr\u003eSingle component formula\u003cbr\u003ePermanent UV stability\u003cbr\u003eNo chalking or fading\u003cbr\u003eRock hard permanent topcoat\u003cbr\u003eFlexible coating which expands \u0026amp; contracts\u003cbr\u003eHigh temp resistance\u003cbr\u003eNon-porous coating\u003cbr\u003eSuperior flow and levelling\u003cbr\u003eApply by brush or sprayer\u003c\/p\u003e\n\u003cp\u003eKBS BlackTop is a permanent high solids, single component moisture curing custom black top coat. BlackTop is the latest development in ultra high performance topcoats with very high solids (over 60%) and low VOCs.\u003cbr\u003e\u003cbr\u003eBlackTop once cured is incredibly tough and hard like no other black topcoat you have used before. This wet gloss\/satin black coating remains permanently flexible and is able to perform in the toughest environments including Australia’s highest UV applications without yellowing or cracking.\u003cbr\u003e\u003cbr\u003eBlackTop Topcoat can be applied by brush (without brush marks) roller and conventional spray gun easily and unlike normal 2 Pak coatings no hardener is needed! BlackTop Topcoat can cure without heat or UV lights in temperatures from 60°C to 300°C.\u003cbr\u003e\u003cbr\u003eBlackTop Topcoat is a unique type of coating in Australia and unlike any other conventional topcoat, so please read the guidelines, directions and warnings thoroughly.\u003cbr\u003e\u003cbr\u003eIMPORTANT WARNINGS\u003cbr\u003e\u003cbr\u003eDo not paint out of the can\u003cbr\u003eKeep lid on at all times\u003cbr\u003eSeal can immediately after use\u003cbr\u003eKeep paint groove free of coating\u003cbr\u003eIf spraying you must follow all warnings and cautions on the can and in directions\u003cbr\u003eWheels Painted with BlackTop\u003c\/p\u003e\n\u003cp\u003eSURFACE PREPARATION\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0743\/3339\/files\/Black-Top-on-Chassis-195x219_1_large.jpg?v=1486524826\" alt=\"\" width=\"112\" height=\"126\"\u003e\u003cbr\u003e\u003cbr\u003eBlackTop should always be applied over existing primers and never directly over unprimed metal or other surfaces.\u003cbr\u003e\u003cbr\u003eFor coating over solid colour or fully cured coatings;\u003cbr\u003e\u003cbr\u003eClean the surface with conventional surface panel prep solution and \/ or KBS AquaKlean;\u003cbr\u003eDeglaze with 600-1200 sandpaper and clean again, allow to dry.\u003cbr\u003eThe use of Fusion SEP as an intermediary coating is advisable as it will allow for a more even finish but not mandatory.\u003cbr\u003eFor coating over freshly painted RustSeal;\u003cbr\u003e\u003cbr\u003eLess than 2 hours old – Apply BlackTop directly as no other prep is required.\u003cbr\u003eFor all other applications\u003cbr\u003e\u003cbr\u003eLightly sand with 320 grit paper then clean \u0026amp; dry surface before topcoating.\u003cbr\u003ePREPARING FOR APPLICATION\u003cbr\u003e\u003cbr\u003eBlack Top painted on Chassis ALWAYS USE PROTECTIVE GLOVES AND EYEWEAR WHEN USING BLACKTOP.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0743\/3339\/files\/Wheels-Painted-with-BlackTop_large.jpg?v=1486525099\" alt=\"\" width=\"209\" height=\"157\"\u003e\u003cbr\u003e\u003cbr\u003eIdeal application temperatures are 15-25°C.\u003cbr\u003eUse only in moderate to dry atmospheric conditions i.e 65% humidity and lower.\u003cbr\u003eDo not shake can. DO NOT PAINT OUT OF CAN!\u003cbr\u003eAfter a good stir, dispense a working amount of BlackTop into a separate container (steel or glass is best) and seal original can immediately.\u003cbr\u003eUnused paint should NEVER be put back into the can as it will shorten its shelf life and cause pressure build-up possibly popping the lid. Keep can groove free of paint by using a scoop or KBS Paint Spout.\u003cbr\u003eUse plastic wrap between the lid and the top of the can to stop metal to metal contact as Black-Top can permanently seal the lid. If there is any trouble resealing the can lid tightly, transfer and store BlackTop in a proportionally sized clean glass jar or new steel can.\u003cbr\u003eAlways store in a cool dry place.\u003cbr\u003e\u003cbr\u003eAPPLYING BLACKTOP TOPCOAT\u003cbr\u003e\u003cbr\u003eApply BlackTop to clean \u0026amp; dry prepared surfaces using a bristle brush, foam brush, roller, or spray equipment. BlackTop has superior self-levelling properties. Brush marks will flow out. When brushing apply thin covering coats. For large surface areas best results will be achieved with application by spray gun.\u003cbr\u003e\u003cbr\u003eIF SPRAYING, ALWAYS WEAR AN AIR SUPPLIED RESPIRATOR AND EYE PROTECTION: NIOSH\/MSHA approved organic vapor particulate respirator.\u003cbr\u003e\u003cbr\u003eNo.1 Thinner Product ImageThinning is not generally required if brushing, if needed thin 5 – 10%, for spraying 10%-15% is normally adequate but can be thinned up to 30%. Use KBS #1 Thinner ONLY.\u003cbr\u003eWhen spraying: Spray pressure of 35-45 psi, 250-330kpa for siphon\/pot guns and 25-35psi, 170-250kpa for gravity\/top container guns.\u003cbr\u003eAlways apply a MINIMUM of 2 covering coats.\u003cbr\u003eFirst coat thin covering followed by moderate to full coat (50μm each approximately) for general applications.\u003cbr\u003eFor marine or industrial applications, apply a MINIMUM of 3 thin covering coats (50μm each).\u003cbr\u003eRe-coating can be done once the first or consecutive coat is dry-to-touch and does not leave a fingerprint.\u003cbr\u003eRemember to clean your spray gun immediately after using BlackTop.\u003cbr\u003eFOR BEST END RESULTS, always apply coats consecutively within 6 hours of each coat curing.\u003cbr\u003eAverage cure times are 1-2 hours, depending on humidity levels.\u003cbr\u003e\u003cbr\u003eNOTE\u003cbr\u003e\u003cbr\u003eDo not apply BlackTop in wet or humid conditions to avoid rapid curing.\u003cbr\u003eDo not apply BlackTop too thick or too quick between coats.\u003cbr\u003eIn each of these instances, surface bubbling may result as released carbon dioxide becomes entrapped beneath the top surface layer of paint.\u003cbr\u003e\u003cbr\u003eCLEAN UP\u003cbr\u003e\u003cbr\u003eUse KBS #1 Thinner or gun clean for immediate clean up including your spray gun.\u003cbr\u003eIMPORTANT: Remember BlackTop must be cleaned up before it dries. It cannot be removed by any solvent once cured.\u003cbr\u003e\u003cbr\u003eAlways wear protective gloves (KBS Black Nitrile Disposable Gloves) to avoid skin contact and temporary staining. If skin contact accidentally occurs, immediately remove with #1 Thinner or lacquer thinner followed by soap and water. If BlackTop should stain your skin, only the course of time will remove it.\u003cbr\u003e\u003cbr\u003eGENERAL PAINTING TIPS AND GUIDES\u003cbr\u003e\u003cbr\u003eIf painting in conditions of high temperature and humidity thin BlackTop more than normal to avoid gassing.\u003cbr\u003eDo not use UV or bake lights to cure BlackTop.\u003cbr\u003eBlackTop will take 4 days to become hard under normal conditions and will continue to harden over the following weeks.\u003cbr\u003eIn spray booths use low air flow and moderate temperatures for curing.\u003cbr\u003eBlackTop can be cut and polished as a normal Topcoat after 24 hours under normal conditions.\u003c\/p\u003e","brand":"Autobody Supplies","offers":[{"title":"Default Title","offer_id":6902966943779,"sku":"K8602","price":1499.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/3339\/products\/BlackTop_KBS_Chassis_Coater_20_Litre_Satin_Black.jpg?v=1519770746"},{"product_id":"kbs-blacktop-500ml-gloss-black","title":"KBS BlackTop 500ML Gloss Black 8301","description":"\u003cp\u003eProduct Description\u003cbr\u003e\u003cbr\u003eWheels Painted with BlackTopBlackTop is a high performance protective coating specifically formulated to withstand dulling and fading caused by prolonged sunlight exposure. BlackTop may be used alone as a resilient coating, however to achieve ulimate rust protection we recommend BlackTop to be used in combination with KBS RustSeal.\u003cbr\u003e\u003cbr\u003eFirst apply RustSeal by following the easy KBS 3 Step Total Rust Eradication System to permanently seal the surface and then topcoat with BlackTop for an incredibly tough and professional looking finish.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0743\/3339\/files\/Black-Top-All-Sizes2_large.jpg?v=1486524740\" alt=\"\" width=\"196\" height=\"196\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"http:\/\/kbs-coatings.com.au\/wp-content\/uploads\/2014\/02\/Black-Top-All-Sizes2-219x219.jpg\" alt=\"Black Top Product Image\"\u003e\u003cbr\u003e\u003cbr\u003eMore Information:  \u003cbr\u003e\u003cbr\u003eFeatures:\u003cbr\u003e\u003cbr\u003eSingle component formula\u003cbr\u003ePermanent UV stability\u003cbr\u003eNo chalking or fading\u003cbr\u003eRock hard permanent topcoat\u003cbr\u003eFlexible coating which expands \u0026amp; contracts\u003cbr\u003eHigh temp resistance\u003cbr\u003eNon-porous coating\u003cbr\u003eSuperior flow and levelling\u003cbr\u003eApply by brush or sprayer\u003c\/p\u003e\n\u003cp\u003eKBS BlackTop is a permanent high solids, single component moisture curing custom black top coat. BlackTop is the latest development in ultra high performance topcoats with very high solids (over 60%) and low VOCs.\u003cbr\u003e\u003cbr\u003eBlackTop once cured is incredibly tough and hard like no other black topcoat you have used before. This wet gloss\/satin black coating remains permanently flexible and is able to perform in the toughest environments including Australia’s highest UV applications without yellowing or cracking.\u003cbr\u003e\u003cbr\u003eBlackTop Topcoat can be applied by brush (without brush marks) roller and conventional spray gun easily and unlike normal 2 Pak coatings no hardener is needed! BlackTop Topcoat can cure without heat or UV lights in temperatures from 60°C to 300°C.\u003cbr\u003e\u003cbr\u003eBlackTop Topcoat is a unique type of coating in Australia and unlike any other conventional topcoat, so please read the guidelines, directions and warnings thoroughly.\u003cbr\u003e\u003cbr\u003eIMPORTANT WARNINGS\u003cbr\u003e\u003cbr\u003eDo not paint out of the can\u003cbr\u003eKeep lid on at all times\u003cbr\u003eSeal can immediately after use\u003cbr\u003eKeep paint groove free of coating\u003cbr\u003eIf spraying you must follow all warnings and cautions on the can and in directions\u003cbr\u003eWheels Painted with BlackTop\u003c\/p\u003e\n\u003cp\u003eSURFACE PREPARATION\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0743\/3339\/files\/Black-Top-on-Chassis-195x219_1_large.jpg?v=1486524826\" alt=\"\" width=\"112\" height=\"126\"\u003e\u003cbr\u003e\u003cbr\u003eBlackTop should always be applied over existing primers and never directly over unprimed metal or other surfaces.\u003cbr\u003e\u003cbr\u003eFor coating over solid colour or fully cured coatings;\u003cbr\u003e\u003cbr\u003eClean the surface with conventional surface panel prep solution and \/ or KBS AquaKlean;\u003cbr\u003eDeglaze with 600-1200 sandpaper and clean again, allow to dry.\u003cbr\u003eThe use of Fusion SEP as an intermediary coating is advisable as it will allow for a more even finish but not mandatory.\u003cbr\u003eFor coating over freshly painted RustSeal;\u003cbr\u003e\u003cbr\u003eLess than 2 hours old – Apply BlackTop directly as no other prep is required.\u003cbr\u003eFor all other applications\u003cbr\u003e\u003cbr\u003eLightly sand with 320 grit paper then clean \u0026amp; dry surface before topcoating.\u003cbr\u003ePREPARING FOR APPLICATION\u003cbr\u003e\u003cbr\u003eBlack Top painted on Chassis ALWAYS USE PROTECTIVE GLOVES AND EYEWEAR WHEN USING BLACKTOP.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0743\/3339\/files\/Wheels-Painted-with-BlackTop_large.jpg?v=1486525099\" alt=\"\" width=\"209\" height=\"157\"\u003e\u003cbr\u003e\u003cbr\u003eIdeal application temperatures are 15-25°C.\u003cbr\u003eUse only in moderate to dry atmospheric conditions i.e 65% humidity and lower.\u003cbr\u003eDo not shake can. DO NOT PAINT OUT OF CAN!\u003cbr\u003eAfter a good stir, dispense a working amount of BlackTop into a separate container (steel or glass is best) and seal original can immediately.\u003cbr\u003eUnused paint should NEVER be put back into the can as it will shorten its shelf life and cause pressure build-up possibly popping the lid. Keep can groove free of paint by using a scoop or KBS Paint Spout.\u003cbr\u003eUse plastic wrap between the lid and the top of the can to stop metal to metal contact as Black-Top can permanently seal the lid. If there is any trouble resealing the can lid tightly, transfer and store BlackTop in a proportionally sized clean glass jar or new steel can.\u003cbr\u003eAlways store in a cool dry place.\u003cbr\u003e\u003cbr\u003eAPPLYING BLACKTOP TOPCOAT\u003cbr\u003e\u003cbr\u003eApply BlackTop to clean \u0026amp; dry prepared surfaces using a bristle brush, foam brush, roller, or spray equipment. BlackTop has superior self-levelling properties. Brush marks will flow out. When brushing apply thin covering coats. For large surface areas best results will be achieved with application by spray gun.\u003cbr\u003e\u003cbr\u003eIF SPRAYING, ALWAYS WEAR AN AIR SUPPLIED RESPIRATOR AND EYE PROTECTION: NIOSH\/MSHA approved organic vapor particulate respirator.\u003cbr\u003e\u003cbr\u003eNo.1 Thinner Product ImageThinning is not generally required if brushing, if needed thin 5 – 10%, for spraying 10%-15% is normally adequate but can be thinned up to 30%. Use KBS #1 Thinner ONLY.\u003cbr\u003eWhen spraying: Spray pressure of 35-45 psi, 250-330kpa for siphon\/pot guns and 25-35psi, 170-250kpa for gravity\/top container guns.\u003cbr\u003eAlways apply a MINIMUM of 2 covering coats.\u003cbr\u003eFirst coat thin covering followed by moderate to full coat (50μm each approximately) for general applications.\u003cbr\u003eFor marine or industrial applications, apply a MINIMUM of 3 thin covering coats (50μm each).\u003cbr\u003eRe-coating can be done once the first or consecutive coat is dry-to-touch and does not leave a fingerprint.\u003cbr\u003eRemember to clean your spray gun immediately after using BlackTop.\u003cbr\u003eFOR BEST END RESULTS, always apply coats consecutively within 6 hours of each coat curing.\u003cbr\u003eAverage cure times are 1-2 hours, depending on humidity levels.\u003cbr\u003e\u003cbr\u003eNOTE\u003cbr\u003e\u003cbr\u003eDo not apply BlackTop in wet or humid conditions to avoid rapid curing.\u003cbr\u003eDo not apply BlackTop too thick or too quick between coats.\u003cbr\u003eIn each of these instances, surface bubbling may result as released carbon dioxide becomes entrapped beneath the top surface layer of paint.\u003cbr\u003e\u003cbr\u003eCLEAN UP\u003cbr\u003e\u003cbr\u003eUse KBS #1 Thinner or gun clean for immediate clean up including your spray gun.\u003cbr\u003eIMPORTANT: Remember BlackTop must be cleaned up before it dries. It cannot be removed by any solvent once cured.\u003cbr\u003e\u003cbr\u003eAlways wear protective gloves (KBS Black Nitrile Disposable Gloves) to avoid skin contact and temporary staining. If skin contact accidentally occurs, immediately remove with #1 Thinner or lacquer thinner followed by soap and water. If BlackTop should stain your skin, only the course of time will remove it.\u003cbr\u003e\u003cbr\u003eGENERAL PAINTING TIPS AND GUIDES\u003cbr\u003e\u003cbr\u003eIf painting in conditions of high temperature and humidity thin BlackTop more than normal to avoid gassing.\u003cbr\u003eDo not use UV or bake lights to cure BlackTop.\u003cbr\u003eBlackTop will take 4 days to become hard under normal conditions and will continue to harden over the following weeks.\u003cbr\u003eIn spray booths use low air flow and moderate temperatures for curing.\u003cbr\u003eBlackTop can be cut and polished as a normal Topcoat after 24 hours under normal conditions.\u003c\/p\u003e","brand":"Autobody Supplies","offers":[{"title":"Default Title","offer_id":6902980083747,"sku":"K8301","price":119.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/3339\/products\/BlackTop_KBS_Chassis_Coater_500ml_Gloss_Black.jpg?v=1519770853"},{"product_id":"kbs-blacktop-4-litre-gloss-black","title":"KBS BlackTop 4 Litre Gloss Black 8501","description":"\u003cp\u003eProduct Description\u003cbr\u003e\u003cbr\u003eWheels Painted with BlackTopBlackTop is a high performance protective coating specifically formulated to withstand dulling and fading caused by prolonged sunlight exposure. BlackTop may be used alone as a resilient coating, however to achieve ulimate rust protection we recommend BlackTop to be used in combination with KBS RustSeal.\u003cbr\u003e\u003cbr\u003eFirst apply RustSeal by following the easy KBS 3 Step Total Rust Eradication System to permanently seal the surface and then topcoat with BlackTop for an incredibly tough and professional looking finish.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0743\/3339\/files\/Black-Top-All-Sizes2_large.jpg?v=1486524740\" alt=\"\" width=\"196\" height=\"196\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"http:\/\/kbs-coatings.com.au\/wp-content\/uploads\/2014\/02\/Black-Top-All-Sizes2-219x219.jpg\" alt=\"Black Top Product Image\"\u003e\u003cbr\u003e\u003cbr\u003eMore Information:  \u003cbr\u003e\u003cbr\u003eFeatures:\u003cbr\u003e\u003cbr\u003eSingle component formula\u003cbr\u003ePermanent UV stability\u003cbr\u003eNo chalking or fading\u003cbr\u003eRock hard permanent topcoat\u003cbr\u003eFlexible coating which expands \u0026amp; contracts\u003cbr\u003eHigh temp resistance\u003cbr\u003eNon-porous coating\u003cbr\u003eSuperior flow and levelling\u003cbr\u003eApply by brush or sprayer\u003c\/p\u003e\n\u003cp\u003eKBS BlackTop is a permanent high solids, single component moisture curing custom black top coat. BlackTop is the latest development in ultra high performance topcoats with very high solids (over 60%) and low VOCs.\u003cbr\u003e\u003cbr\u003eBlackTop once cured is incredibly tough and hard like no other black topcoat you have used before. This wet gloss\/satin black coating remains permanently flexible and is able to perform in the toughest environments including Australia’s highest UV applications without yellowing or cracking.\u003cbr\u003e\u003cbr\u003eBlackTop Topcoat can be applied by brush (without brush marks) roller and conventional spray gun easily and unlike normal 2 Pak coatings no hardener is needed! BlackTop Topcoat can cure without heat or UV lights in temperatures from 60°C to 300°C.\u003cbr\u003e\u003cbr\u003eBlackTop Topcoat is a unique type of coating in Australia and unlike any other conventional topcoat, so please read the guidelines, directions and warnings thoroughly.\u003cbr\u003e\u003cbr\u003eIMPORTANT WARNINGS\u003cbr\u003e\u003cbr\u003eDo not paint out of the can\u003cbr\u003eKeep lid on at all times\u003cbr\u003eSeal can immediately after use\u003cbr\u003eKeep paint groove free of coating\u003cbr\u003eIf spraying you must follow all warnings and cautions on the can and in directions\u003cbr\u003eWheels Painted with BlackTop\u003c\/p\u003e\n\u003cp\u003eSURFACE PREPARATION\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0743\/3339\/files\/Black-Top-on-Chassis-195x219_1_large.jpg?v=1486524826\" alt=\"\" width=\"112\" height=\"126\"\u003e\u003cbr\u003e\u003cbr\u003eBlackTop should always be applied over existing primers and never directly over unprimed metal or other surfaces.\u003cbr\u003e\u003cbr\u003eFor coating over solid colour or fully cured coatings;\u003cbr\u003e\u003cbr\u003eClean the surface with conventional surface panel prep solution and \/ or KBS AquaKlean;\u003cbr\u003eDeglaze with 600-1200 sandpaper and clean again, allow to dry.\u003cbr\u003eThe use of Fusion SEP as an intermediary coating is advisable as it will allow for a more even finish but not mandatory.\u003cbr\u003eFor coating over freshly painted RustSeal;\u003cbr\u003e\u003cbr\u003eLess than 2 hours old – Apply BlackTop directly as no other prep is required.\u003cbr\u003eFor all other applications\u003cbr\u003e\u003cbr\u003eLightly sand with 320 grit paper then clean \u0026amp; dry surface before topcoating.\u003cbr\u003ePREPARING FOR APPLICATION\u003cbr\u003e\u003cbr\u003eBlack Top painted on Chassis ALWAYS USE PROTECTIVE GLOVES AND EYEWEAR WHEN USING BLACKTOP.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0743\/3339\/files\/Wheels-Painted-with-BlackTop_large.jpg?v=1486525099\" alt=\"\" width=\"209\" height=\"157\"\u003e\u003cbr\u003e\u003cbr\u003eIdeal application temperatures are 15-25°C.\u003cbr\u003eUse only in moderate to dry atmospheric conditions i.e 65% humidity and lower.\u003cbr\u003eDo not shake can. DO NOT PAINT OUT OF CAN!\u003cbr\u003eAfter a good stir, dispense a working amount of BlackTop into a separate container (steel or glass is best) and seal original can immediately.\u003cbr\u003eUnused paint should NEVER be put back into the can as it will shorten its shelf life and cause pressure build-up possibly popping the lid. Keep can groove free of paint by using a scoop or KBS Paint Spout.\u003cbr\u003eUse plastic wrap between the lid and the top of the can to stop metal to metal contact as Black-Top can permanently seal the lid. If there is any trouble resealing the can lid tightly, transfer and store BlackTop in a proportionally sized clean glass jar or new steel can.\u003cbr\u003eAlways store in a cool dry place.\u003cbr\u003e\u003cbr\u003eAPPLYING BLACKTOP TOPCOAT\u003cbr\u003e\u003cbr\u003eApply BlackTop to clean \u0026amp; dry prepared surfaces using a bristle brush, foam brush, roller, or spray equipment. BlackTop has superior self-levelling properties. Brush marks will flow out. When brushing apply thin covering coats. For large surface areas best results will be achieved with application by spray gun.\u003cbr\u003e\u003cbr\u003eIF SPRAYING, ALWAYS WEAR AN AIR SUPPLIED RESPIRATOR AND EYE PROTECTION: NIOSH\/MSHA approved organic vapor particulate respirator.\u003cbr\u003e\u003cbr\u003eNo.1 Thinner Product ImageThinning is not generally required if brushing, if needed thin 5 – 10%, for spraying 10%-15% is normally adequate but can be thinned up to 30%. Use KBS #1 Thinner ONLY.\u003cbr\u003eWhen spraying: Spray pressure of 35-45 psi, 250-330kpa for siphon\/pot guns and 25-35psi, 170-250kpa for gravity\/top container guns.\u003cbr\u003eAlways apply a MINIMUM of 2 covering coats.\u003cbr\u003eFirst coat thin covering followed by moderate to full coat (50μm each approximately) for general applications.\u003cbr\u003eFor marine or industrial applications, apply a MINIMUM of 3 thin covering coats (50μm each).\u003cbr\u003eRe-coating can be done once the first or consecutive coat is dry-to-touch and does not leave a fingerprint.\u003cbr\u003eRemember to clean your spray gun immediately after using BlackTop.\u003cbr\u003eFOR BEST END RESULTS, always apply coats consecutively within 6 hours of each coat curing.\u003cbr\u003eAverage cure times are 1-2 hours, depending on humidity levels.\u003cbr\u003e\u003cbr\u003eNOTE\u003cbr\u003e\u003cbr\u003eDo not apply BlackTop in wet or humid conditions to avoid rapid curing.\u003cbr\u003eDo not apply BlackTop too thick or too quick between coats.\u003cbr\u003eIn each of these instances, surface bubbling may result as released carbon dioxide becomes entrapped beneath the top surface layer of paint.\u003cbr\u003e\u003cbr\u003eCLEAN UP\u003cbr\u003e\u003cbr\u003eUse KBS #1 Thinner or gun clean for immediate clean up including your spray gun.\u003cbr\u003eIMPORTANT: Remember BlackTop must be cleaned up before it dries. It cannot be removed by any solvent once cured.\u003cbr\u003e\u003cbr\u003eAlways wear protective gloves (KBS Black Nitrile Disposable Gloves) to avoid skin contact and temporary staining. If skin contact accidentally occurs, immediately remove with #1 Thinner or lacquer thinner followed by soap and water. If BlackTop should stain your skin, only the course of time will remove it.\u003cbr\u003e\u003cbr\u003eGENERAL PAINTING TIPS AND GUIDES\u003cbr\u003e\u003cbr\u003eIf painting in conditions of high temperature and humidity thin BlackTop more than normal to avoid gassing.\u003cbr\u003eDo not use UV or bake lights to cure BlackTop.\u003cbr\u003eBlackTop will take 4 days to become hard under normal conditions and will continue to harden over the following weeks.\u003cbr\u003eIn spray booths use low air flow and moderate temperatures for curing.\u003cbr\u003eBlackTop can be cut and polished as a normal Topcoat after 24 hours under normal conditions.\u003c\/p\u003e","brand":"Autobody Supplies","offers":[{"title":"Default Title","offer_id":6902989127715,"sku":"K8501","price":495.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/3339\/products\/BlackTop_KBS_Chassis_Coater_4_Litre_Gloss_Black.jpg?v=1519771028"},{"product_id":"kbs-blacktop-20-litre-gloss-black","title":"KBS BlackTop 20 Litre Gloss Black 8601","description":"\u003cp\u003eProduct Description\u003cbr\u003e\u003cbr\u003eWheels Painted with BlackTopBlackTop is a high performance protective coating specifically formulated to withstand dulling and fading caused by prolonged sunlight exposure. BlackTop may be used alone as a resilient coating, however to achieve ulimate rust protection we recommend BlackTop to be used in combination with KBS RustSeal.\u003cbr\u003e\u003cbr\u003eFirst apply RustSeal by following the easy KBS 3 Step Total Rust Eradication System to permanently seal the surface and then topcoat with BlackTop for an incredibly tough and professional looking finish.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0743\/3339\/files\/Black-Top-All-Sizes2_large.jpg?v=1486524740\" alt=\"\" width=\"196\" height=\"196\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"http:\/\/kbs-coatings.com.au\/wp-content\/uploads\/2014\/02\/Black-Top-All-Sizes2-219x219.jpg\" alt=\"Black Top Product Image\"\u003e\u003cbr\u003e\u003cbr\u003eMore Information:  \u003cbr\u003e\u003cbr\u003eFeatures:\u003cbr\u003e\u003cbr\u003eSingle component formula\u003cbr\u003ePermanent UV stability\u003cbr\u003eNo chalking or fading\u003cbr\u003eRock hard permanent topcoat\u003cbr\u003eFlexible coating which expands \u0026amp; contracts\u003cbr\u003eHigh temp resistance\u003cbr\u003eNon-porous coating\u003cbr\u003eSuperior flow and levelling\u003cbr\u003eApply by brush or sprayer\u003c\/p\u003e\n\u003cp\u003eKBS BlackTop is a permanent high solids, single component moisture curing custom black top coat. BlackTop is the latest development in ultra high performance topcoats with very high solids (over 60%) and low VOCs.\u003cbr\u003e\u003cbr\u003eBlackTop once cured is incredibly tough and hard like no other black topcoat you have used before. This wet gloss\/satin black coating remains permanently flexible and is able to perform in the toughest environments including Australia’s highest UV applications without yellowing or cracking.\u003cbr\u003e\u003cbr\u003eBlackTop Topcoat can be applied by brush (without brush marks) roller and conventional spray gun easily and unlike normal 2 Pak coatings no hardener is needed! BlackTop Topcoat can cure without heat or UV lights in temperatures from 60°C to 300°C.\u003cbr\u003e\u003cbr\u003eBlackTop Topcoat is a unique type of coating in Australia and unlike any other conventional topcoat, so please read the guidelines, directions and warnings thoroughly.\u003cbr\u003e\u003cbr\u003eIMPORTANT WARNINGS\u003cbr\u003e\u003cbr\u003eDo not paint out of the can\u003cbr\u003eKeep lid on at all times\u003cbr\u003eSeal can immediately after use\u003cbr\u003eKeep paint groove free of coating\u003cbr\u003eIf spraying you must follow all warnings and cautions on the can and in directions\u003cbr\u003eWheels Painted with BlackTop\u003c\/p\u003e\n\u003cp\u003eSURFACE PREPARATION\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0743\/3339\/files\/Black-Top-on-Chassis-195x219_1_large.jpg?v=1486524826\" alt=\"\" width=\"112\" height=\"126\"\u003e\u003cbr\u003e\u003cbr\u003eBlackTop should always be applied over existing primers and never directly over unprimed metal or other surfaces.\u003cbr\u003e\u003cbr\u003eFor coating over solid colour or fully cured coatings;\u003cbr\u003e\u003cbr\u003eClean the surface with conventional surface panel prep solution and \/ or KBS AquaKlean;\u003cbr\u003eDeglaze with 600-1200 sandpaper and clean again, allow to dry.\u003cbr\u003eThe use of Fusion SEP as an intermediary coating is advisable as it will allow for a more even finish but not mandatory.\u003cbr\u003eFor coating over freshly painted RustSeal;\u003cbr\u003e\u003cbr\u003eLess than 2 hours old – Apply BlackTop directly as no other prep is required.\u003cbr\u003eFor all other applications\u003cbr\u003e\u003cbr\u003eLightly sand with 320 grit paper then clean \u0026amp; dry surface before topcoating.\u003cbr\u003ePREPARING FOR APPLICATION\u003cbr\u003e\u003cbr\u003eBlack Top painted on Chassis ALWAYS USE PROTECTIVE GLOVES AND EYEWEAR WHEN USING BLACKTOP.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0743\/3339\/files\/Wheels-Painted-with-BlackTop_large.jpg?v=1486525099\" alt=\"\" width=\"209\" height=\"157\"\u003e\u003cbr\u003e\u003cbr\u003eIdeal application temperatures are 15-25°C.\u003cbr\u003eUse only in moderate to dry atmospheric conditions i.e 65% humidity and lower.\u003cbr\u003eDo not shake can. DO NOT PAINT OUT OF CAN!\u003cbr\u003eAfter a good stir, dispense a working amount of BlackTop into a separate container (steel or glass is best) and seal original can immediately.\u003cbr\u003eUnused paint should NEVER be put back into the can as it will shorten its shelf life and cause pressure build-up possibly popping the lid. Keep can groove free of paint by using a scoop or KBS Paint Spout.\u003cbr\u003eUse plastic wrap between the lid and the top of the can to stop metal to metal contact as Black-Top can permanently seal the lid. If there is any trouble resealing the can lid tightly, transfer and store BlackTop in a proportionally sized clean glass jar or new steel can.\u003cbr\u003eAlways store in a cool dry place.\u003cbr\u003e\u003cbr\u003eAPPLYING BLACKTOP TOPCOAT\u003cbr\u003e\u003cbr\u003eApply BlackTop to clean \u0026amp; dry prepared surfaces using a bristle brush, foam brush, roller, or spray equipment. BlackTop has superior self-levelling properties. Brush marks will flow out. When brushing apply thin covering coats. For large surface areas best results will be achieved with application by spray gun.\u003cbr\u003e\u003cbr\u003eIF SPRAYING, ALWAYS WEAR AN AIR SUPPLIED RESPIRATOR AND EYE PROTECTION: NIOSH\/MSHA approved organic vapor particulate respirator.\u003cbr\u003e\u003cbr\u003eNo.1 Thinner Product ImageThinning is not generally required if brushing, if needed thin 5 – 10%, for spraying 10%-15% is normally adequate but can be thinned up to 30%. Use KBS #1 Thinner ONLY.\u003cbr\u003eWhen spraying: Spray pressure of 35-45 psi, 250-330kpa for siphon\/pot guns and 25-35psi, 170-250kpa for gravity\/top container guns.\u003cbr\u003eAlways apply a MINIMUM of 2 covering coats.\u003cbr\u003eFirst coat thin covering followed by moderate to full coat (50μm each approximately) for general applications.\u003cbr\u003eFor marine or industrial applications, apply a MINIMUM of 3 thin covering coats (50μm each).\u003cbr\u003eRe-coating can be done once the first or consecutive coat is dry-to-touch and does not leave a fingerprint.\u003cbr\u003eRemember to clean your spray gun immediately after using BlackTop.\u003cbr\u003eFOR BEST END RESULTS, always apply coats consecutively within 6 hours of each coat curing.\u003cbr\u003eAverage cure times are 1-2 hours, depending on humidity levels.\u003cbr\u003e\u003cbr\u003eNOTE\u003cbr\u003e\u003cbr\u003eDo not apply BlackTop in wet or humid conditions to avoid rapid curing.\u003cbr\u003eDo not apply BlackTop too thick or too quick between coats.\u003cbr\u003eIn each of these instances, surface bubbling may result as released carbon dioxide becomes entrapped beneath the top surface layer of paint.\u003cbr\u003e\u003cbr\u003eCLEAN UP\u003cbr\u003e\u003cbr\u003eUse KBS #1 Thinner or gun clean for immediate clean up including your spray gun.\u003cbr\u003eIMPORTANT: Remember BlackTop must be cleaned up before it dries. It cannot be removed by any solvent once cured.\u003cbr\u003e\u003cbr\u003eAlways wear protective gloves (KBS Black Nitrile Disposable Gloves) to avoid skin contact and temporary staining. If skin contact accidentally occurs, immediately remove with #1 Thinner or lacquer thinner followed by soap and water. If BlackTop should stain your skin, only the course of time will remove it.\u003cbr\u003e\u003cbr\u003eGENERAL PAINTING TIPS AND GUIDES\u003cbr\u003e\u003cbr\u003eIf painting in conditions of high temperature and humidity thin BlackTop more than normal to avoid gassing.\u003cbr\u003eDo not use UV or bake lights to cure BlackTop.\u003cbr\u003eBlackTop will take 4 days to become hard under normal conditions and will continue to harden over the following weeks.\u003cbr\u003eIn spray booths use low air flow and moderate temperatures for curing.\u003cbr\u003eBlackTop can be cut and polished as a normal Topcoat after 24 hours under normal conditions.\u003c\/p\u003e","brand":"Autobody Supplies","offers":[{"title":"Default Title","offer_id":6902995255331,"sku":"K8601","price":1499.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/3339\/products\/BlackTop_KBS_Chassis_Coater_20_Litre_Gloss_Blackk.jpg?v=1519771155"},{"product_id":"kbs-fusion-primer-grey-400-grams","title":"KBS Fusion Primer Tie-Coat Primer Grey 310 Grams","description":"\u003cp\u003eDescription\u003cbr\u003eLooking for a fast drying and easy to apply tie-coat that allows you to quickly topcoat RustSeal or any other coatings? …then Fusion is what you need!\u003cbr\u003e\u003cbr\u003eFusion is an all-purpose grey primer ideal for promoting adhesion between multiple surface coatings, including applications of topcoats and primers or over fully cured RustSeal. Fusion allows you to topcoat over a smooth, rock-hard RustSeal surface that has been in place for months or years – Just lightly sand the surface using 280 to 320 grit sandpaper before applying a thin covering coat of Fusion then topcoat as desired.\u003cbr\u003e\u003cbr\u003eFusion can be sprayed on almost any painted surface and is ready for a topcoat in 20 to 30 minutes. This terrific all-purpose tie-coat is ideal for promoting adhesion between multiple surface coatings.\u003cbr\u003e\u003cbr\u003eMore Information: \u003cbr\u003e\u003cbr\u003eFeatures:\u003cbr\u003eAn all purpose tie-coat\u003cbr\u003eBonds to cured RustSeal\u003cbr\u003eTopcoat or re-prime in 20 minutes\u003cbr\u003eCompatible with bake ovens\u003cbr\u003eOvercoat with any type of paint\u003cbr\u003eAvailable in aerosol \u003c\/p\u003e","brand":"Autobody Supplies","offers":[{"title":"Default Title","offer_id":39462300516427,"sku":"K7100","price":39.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/3339\/products\/KBSFusionTie-CoatPrimerGrey400Grams.jpg?v=1628238378"},{"product_id":"kbs-blacktop-500ml-satin-black-8302","title":"KBS BlackTop 500ML Satin Black 8302","description":"\u003cp\u003eProduct Description\u003cbr\u003e\u003cbr\u003eWheels Painted with BlackTopBlackTop is a high performance protective coating specifically formulated to withstand dulling and fading caused by prolonged sunlight exposure. BlackTop may be used alone as a resilient coating, however to achieve ulimate rust protection we recommend BlackTop to be used in combination with KBS RustSeal.\u003cbr\u003e\u003cbr\u003eFirst apply RustSeal by following the easy KBS 3 Step Total Rust Eradication System to permanently seal the surface and then topcoat with BlackTop for an incredibly tough and professional looking finish.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0743\/3339\/files\/Black-Top-All-Sizes2_large.jpg?v=1486524740\" alt=\"\" width=\"196\" height=\"196\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"http:\/\/kbs-coatings.com.au\/wp-content\/uploads\/2014\/02\/Black-Top-All-Sizes2-219x219.jpg\" alt=\"Black Top Product Image\"\u003e\u003cbr\u003e\u003cbr\u003eMore Information:  \u003cbr\u003e\u003cbr\u003eFeatures:\u003cbr\u003e\u003cbr\u003eSingle component formula\u003cbr\u003ePermanent UV stability\u003cbr\u003eNo chalking or fading\u003cbr\u003eRock hard permanent topcoat\u003cbr\u003eFlexible coating which expands \u0026amp; contracts\u003cbr\u003eHigh temp resistance\u003cbr\u003eNon-porous coating\u003cbr\u003eSuperior flow and levelling\u003cbr\u003eApply by brush or sprayer\u003c\/p\u003e\n\u003cp\u003eKBS BlackTop is a permanent high solids, single component moisture curing custom black top coat. BlackTop is the latest development in ultra high performance topcoats with very high solids (over 60%) and low VOCs.\u003cbr\u003e\u003cbr\u003eBlackTop once cured is incredibly tough and hard like no other black topcoat you have used before. This wet gloss\/satin black coating remains permanently flexible and is able to perform in the toughest environments including Australia’s highest UV applications without yellowing or cracking.\u003cbr\u003e\u003cbr\u003eBlackTop Topcoat can be applied by brush (without brush marks) roller and conventional spray gun easily and unlike normal 2 Pak coatings no hardener is needed! BlackTop Topcoat can cure without heat or UV lights in temperatures from 60°C to 300°C.\u003cbr\u003e\u003cbr\u003eBlackTop Topcoat is a unique type of coating in Australia and unlike any other conventional topcoat, so please read the guidelines, directions and warnings thoroughly.\u003cbr\u003e\u003cbr\u003eIMPORTANT WARNINGS\u003cbr\u003e\u003cbr\u003eDo not paint out of the can\u003cbr\u003eKeep lid on at all times\u003cbr\u003eSeal can immediately after use\u003cbr\u003eKeep paint groove free of coating\u003cbr\u003eIf spraying you must follow all warnings and cautions on the can and in directions\u003cbr\u003eWheels Painted with BlackTop\u003c\/p\u003e\n\u003cp\u003eSURFACE PREPARATION\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0743\/3339\/files\/Black-Top-on-Chassis-195x219_1_large.jpg?v=1486524826\" alt=\"\" width=\"112\" height=\"126\"\u003e\u003cbr\u003e\u003cbr\u003eBlackTop should always be applied over existing primers and never directly over unprimed metal or other surfaces.\u003cbr\u003e\u003cbr\u003eFor coating over solid colour or fully cured coatings;\u003cbr\u003e\u003cbr\u003eClean the surface with conventional surface panel prep solution and \/ or KBS AquaKlean;\u003cbr\u003eDeglaze with 600-1200 sandpaper and clean again, allow to dry.\u003cbr\u003eThe use of Fusion SEP as an intermediary coating is advisable as it will allow for a more even finish but not mandatory.\u003cbr\u003eFor coating over freshly painted RustSeal;\u003cbr\u003e\u003cbr\u003eLess than 2 hours old – Apply BlackTop directly as no other prep is required.\u003cbr\u003eFor all other applications\u003cbr\u003e\u003cbr\u003eLightly sand with 320 grit paper then clean \u0026amp; dry surface before topcoating.\u003cbr\u003ePREPARING FOR APPLICATION\u003cbr\u003e\u003cbr\u003eBlack Top painted on Chassis ALWAYS USE PROTECTIVE GLOVES AND EYEWEAR WHEN USING BLACKTOP.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0743\/3339\/files\/Wheels-Painted-with-BlackTop_large.jpg?v=1486525099\" alt=\"\" width=\"209\" height=\"157\"\u003e\u003cbr\u003e\u003cbr\u003eIdeal application temperatures are 15-25°C.\u003cbr\u003eUse only in moderate to dry atmospheric conditions i.e 65% humidity and lower.\u003cbr\u003eDo not shake can. DO NOT PAINT OUT OF CAN!\u003cbr\u003eAfter a good stir, dispense a working amount of BlackTop into a separate container (steel or glass is best) and seal original can immediately.\u003cbr\u003eUnused paint should NEVER be put back into the can as it will shorten its shelf life and cause pressure build-up possibly popping the lid. Keep can groove free of paint by using a scoop or KBS Paint Spout.\u003cbr\u003eUse plastic wrap between the lid and the top of the can to stop metal to metal contact as Black-Top can permanently seal the lid. If there is any trouble resealing the can lid tightly, transfer and store BlackTop in a proportionally sized clean glass jar or new steel can.\u003cbr\u003eAlways store in a cool dry place.\u003cbr\u003e\u003cbr\u003eAPPLYING BLACKTOP TOPCOAT\u003cbr\u003e\u003cbr\u003eApply BlackTop to clean \u0026amp; dry prepared surfaces using a bristle brush, foam brush, roller, or spray equipment. BlackTop has superior self-levelling properties. Brush marks will flow out. When brushing apply thin covering coats. For large surface areas best results will be achieved with application by spray gun.\u003cbr\u003e\u003cbr\u003eIF SPRAYING, ALWAYS WEAR AN AIR SUPPLIED RESPIRATOR AND EYE PROTECTION: NIOSH\/MSHA approved organic vapor particulate respirator.\u003cbr\u003e\u003cbr\u003eNo.1 Thinner Product ImageThinning is not generally required if brushing, if needed thin 5 – 10%, for spraying 10%-15% is normally adequate but can be thinned up to 30%. Use KBS #1 Thinner ONLY.\u003cbr\u003eWhen spraying: Spray pressure of 35-45 psi, 250-330kpa for siphon\/pot guns and 25-35psi, 170-250kpa for gravity\/top container guns.\u003cbr\u003eAlways apply a MINIMUM of 2 covering coats.\u003cbr\u003eFirst coat thin covering followed by moderate to full coat (50μm each approximately) for general applications.\u003cbr\u003eFor marine or industrial applications, apply a MINIMUM of 3 thin covering coats (50μm each).\u003cbr\u003eRe-coating can be done once the first or consecutive coat is dry-to-touch and does not leave a fingerprint.\u003cbr\u003eRemember to clean your spray gun immediately after using BlackTop.\u003cbr\u003eFOR BEST END RESULTS, always apply coats consecutively within 6 hours of each coat curing.\u003cbr\u003eAverage cure times are 1-2 hours, depending on humidity levels.\u003cbr\u003e\u003cbr\u003eNOTE\u003cbr\u003e\u003cbr\u003eDo not apply BlackTop in wet or humid conditions to avoid rapid curing.\u003cbr\u003eDo not apply BlackTop too thick or too quick between coats.\u003cbr\u003eIn each of these instances, surface bubbling may result as released carbon dioxide becomes entrapped beneath the top surface layer of paint.\u003cbr\u003e\u003cbr\u003eCLEAN UP\u003cbr\u003e\u003cbr\u003eUse KBS #1 Thinner or gun clean for immediate clean up including your spray gun.\u003cbr\u003eIMPORTANT: Remember BlackTop must be cleaned up before it dries. It cannot be removed by any solvent once cured.\u003cbr\u003e\u003cbr\u003eAlways wear protective gloves (KBS Black Nitrile Disposable Gloves) to avoid skin contact and temporary staining. If skin contact accidentally occurs, immediately remove with #1 Thinner or lacquer thinner followed by soap and water. If BlackTop should stain your skin, only the course of time will remove it.\u003cbr\u003e\u003cbr\u003eGENERAL PAINTING TIPS AND GUIDES\u003cbr\u003e\u003cbr\u003eIf painting in conditions of high temperature and humidity thin BlackTop more than normal to avoid gassing.\u003cbr\u003eDo not use UV or bake lights to cure BlackTop.\u003cbr\u003eBlackTop will take 4 days to become hard under normal conditions and will continue to harden over the following weeks.\u003cbr\u003eIn spray booths use low air flow and moderate temperatures for curing.\u003cbr\u003eBlackTop can be cut and polished as a normal Topcoat after 24 hours under normal conditions.\u003c\/p\u003e","brand":"Autobody Supplies","offers":[{"title":"Default Title","offer_id":48680036794641,"sku":"K8302","price":119.95,"currency_code":"AUD","in_stock":true}]}],"url":"https:\/\/varietypaints.com.au\/collections\/kbs-black-top\/por15.oembed","provider":"Variety Paints 'N' More ","version":"1.0","type":"link"}